GWI 2120B

DIN-rail control relay that allows to activate an external circuit when the measured value of current is higher (or lower) than the set intervention value. The threshold, hysteresis and delay...

DIN-rail control relay that allows to activate an external circuit when the measured value of voltage is higher (or lower) than the set intervention value. The threshold, hysteresis and delay...

DIN-rail control relay that detect the exact sequence of phases in three-phase systems and the imbalance of voltage due to the reduction or lack of a phase. The device is useful where is...

DIN-rail mounting timer relay that satisfies timing needs for all civil or industrial applications, such as lighting, activation of motors or pumps.

DIN-rail mounting timer relay that satisfies timing needs allowing, for example, a cyclical control of the connected load such as fans, lights, circulation pumps.

DIN-rail mounting timer relay that satisfies timing needs designed for the management of the three-phase motor activation, ensuring the transfer from the star configuration to the triangle...

DIN-rail mounting timer relay for the management of absorbed power. In case of simultaneous startings of domestic appliances, the device prevents the disconnection of the general switch by...

DIN-rail mounting timer relay for the management of self-produced energy by the photovoltaic system in order to maximize the energy self-consumption. The device measures the quantity of energy...

DIN-rail mounting timer relay for the management of absorbed power. In case of simultaneous startings of domestic appliances, the device prevents the disconnection of the general switch by...

The set consists of a control unit PC RF8 and two actuators RX.16A, designed for the management of absorbed power. In case of simultaneous startings of domestic appliances, this set prevents the...

GSM communication interface for the control of any remote electrical device through the mobile phone. It has an output relay for the connection of the load to be checked. It is possible to...

DIN-rail mounting timer relay for the management of an heating system. The device has two digital inputs that allow to choose between comfort, economy or antifreeze operating mode and the two...

Antenna for GSM interface with 3 m cable lenght useful in case of device installations in shielded electrical panels.

GSM communication interface for the remote control of photovoltaic systems. It is necessary to combine the control unit with a radiation sensor and an energy hour meter: together make the...

Control unit that controls electrical loads designed for the management of absorbed power. In case of simultaneous startings of domestic appliances, the device prevents the disconnection of the...

Radiofrequency remote actuator coupled with the control unit PC RF8. The actuator is designed to be inserted in flush-mounting module box and for the activation or deactivation of loads according...

DIN-rail mounting timer relay for the management of absorbed power. In case of simultaneous startings of domestic appliances, the device prevents the disconnection of the general switch by...

DIN-rail mounting timer relay for the management of self-produced energy by the photovoltaic system in order to maximize the energy self-consumption. The device measures the quantity of energy...